animatedlogo4.gif (189032 bytes)

....

Chris Hampe
chris@seguinfiberglassco.com

1440 North King
Seguin, Texas 78155
830-372-1790
Fax 830-372-3461

diagram.jpg (14414 bytes)

Coating Process

Apply chopped roving and resin with two component
chopper spray machine.
On car washes that are being renovated, surfaces to be
fiberglassed are thoroughly sandblasted to remove residue
and loose paint.

pict2.jpg (11724 bytes)

On new construction, large ceiling joints are covered by the
general contractor and the mortar joints should be as smooth
as possible.

pict1.jpg (12483 bytes)

After the appropriate primer is applied, fiberglass is then
applied.

The final product is a one place, waterproof liner that
dirt, road grime, and mildew will not adhere to.

pict3.jpg (6584 bytes)

Fiberglass will not peel as paint will, and rinses clean easily.

All clean up work shall be done by Contractor to Inspector's approval.


[Description] [Preparation][Mixing &Thinning][Application]
[Quality Assurance][Product Handling][Submittals]
Back To Top